400-800-3875 
產品中心PRODUCTS CENTER
在發展中求生存，不斷完善，以良好信譽和科學的管理促進企業迅速發展
相關文章
ARTICLES詳細介紹
產品名稱：啟蓋器5040-4669
品牌：安捷倫
型號：5040-4669
規格：Ergonomic Manual Crimper for 20mm caps
耗材列表查詢
| Partnumber | 中文名稱 | Description |
| 0100-0090 | 三通接頭0100-0090 | Tee, 1/8 inch Brass |
| 0100-1853 | 安捷倫密封墊0100-1853 | Rotor seal (Vespel, 400 bar, 2 grooves) |
| 0100-2144 | 黃銅球閥 | 1/8inch Ball Valve |
| 0100-2298 | 兩通/接頭PEEK 0100-2298 | Adapter, PEEK int. 1/4-28 to ext. 10-32 |
| 0101-1416 | 安捷倫密封圈0101-1416 | Rotor Seal 2ps/6pt RC IV, P: A/B |
| 01018-22707 | 過濾白頭01018-22707 | PTFE Frits 5PK |
| 05988-20066 | 安捷倫毛細管柱螺帽螺母 | Column Nut for MS interface |
| 07673-40180 | Agilent 07673-40180 螺蚊口瓶的瓶蓋 | Diffusion caps for 4ml vials, 12/PK |
| 0890-1763 | PEEK管線0890-1763 | 1/16 od 0.007 id (0.18mm) 1.5m PEEK tbng |
| 0905-1175 | 清洗密封墊 0905-1175 | Seal, wash |
| 0905-1610 | O形圈0905-1610 | O-Ring, 2-010, Perfluoroelastomer, White |
| 19244-80560 | 可通用的FID噴嘴 | Jet, Adaptable, capillary, 0.29mm ID |
| 19251-00100 | 扳手安捷倫19251-00100 | Wrench for SSL inlet, nut angled |
| 19256-80045 | 隔熱片墊圈,白色 19256-80045 | Heat Shield Gasket, Perfuoroelastomer |
| 5021-7107 | 銅管氣路管5021-7107 | Copper tubing, 1/8in 12 ft length |
| 5040-4669 | 啟蓋器5040-4669 | Ergonomic Manual Crimper for 20mm caps |
| 5041-2168 | 玻璃過濾頭5041-2168 | Glass filter, solvent inlet |
| 5062-2484 | 沖洗墊片 | Gaskets wash seal 6/PK |
| 5063-6589 | 密封墊5063-6589 | Plunger seal for 1100/1200 and 1050 2/PK |
| 5063-6591 | PEEK接頭5063-6591 | Fitting-Fingertight PEEK for 1/16-in |
| 5067-4728 | 密封蓋5067-4728 | Seal Cap Assembly |
| 5080-8750 | 黃銅螺帽 | Fittings 1/8inch Brass 20/PK |
| 5080-8853 | 石墨密封墊圈5080-8853 | Ferrule, 0.5mm Graphite 0.32 col 10/PK |
| 5180-4121 | 安捷倫螺帽5180-4121 | Cap, 1/8inch Brass, 6/Pk |
| 5180-4131 | 安捷倫接頭5180-4131 | Reducer, Union, 1/4 x 1/8 Brass 2/PK |
| 5180-4160 | 5180-4160黃銅三通接頭 | Tee, 1/8inch Brass Union 2/PK |
| 5181-1267 | 5181-1267 自動進樣器 | Syringe, 10ul tapered, FN 23-26s/42/HP |
| 5181-1273 | 自動進樣針5181-1273 | Syringe, 5ul tapered, FN 23-26s/42/HP |
| 5181-3360 | 自動進樣針5181-3360 | Syr. 10ul tapered, FN 23-26s/42/HP, 6/PK |
| 5181-7481 | 5181-7481黃銅三通接頭 | 1/8 Nut And Ferrule Set Brass Swagelok |
| 5181-8830 | 安捷倫螺母5181-8830 | Column nut, universal 2/PK |
| 5182-0714 | 進樣瓶5182-0714 | Vial,screw,2ml,clr,cert,100PK |
| 5182-0715 | 進樣瓶5182-0715 | Vial,screw,2ml,clr,WrtOn,cert,100PK |
| 5182-0717 | 進樣瓶蓋5182-0717 | Blue screw caps 100/PK |
| 5182-0731 | 進樣瓶墊5182-0731 | Septa, PTFE/red silicone, 8.7mm 100/pk |
| 5182-3465 | 梅花螺絲起子5182-3465 | Torx Screwdriver, T20 Size |
| 5183-4647 | 分流襯管5183-4647 | Liner,split,low prs drop,glswl,tpr,deact |
| 5183-4711 | 襯管5183-4711 | Lnr,gen purp split/spltls,tpr,glswl,deac |
| 5183-4757 | 進樣口隔墊 | Septa Non-Stick BTO Inlet 11mm 50 pk |
| 5183-4757-100 | 進樣口隔墊 | Septa Non-Stick BTO Inlet 11mm 100 pk |
| 5188-5367 | 密封墊圈5188-5367 | Gold Plated Inlet Seal with Washer |
| 5190-1483 | 進樣針5190-1483 | Syringe, 10.0 uL, FN, bevel tip |
| 5190-2293 | 襯管5190-2293 | Liner,UI,splitless,sngle taper,glasswool |
| 5190-2295 | 分流襯管5190-2295 | Liner,UI,universal,low pressure drop,GW |
| 8710-0510 | 8710-0510開口扳手 | Tool, wrench 1/4 inch to 5/16 inch |
| 8710-0803 | 8710-0803開口扳手 | Wrench, open end 7/16in and 9/16in |
| 8710-0806 | 8710-0806開口扳手 | Wrench, open end 1/2in and 7/16in |
| 8710-0972 | 8710-0972開口扳手 | Wrench, open end 7/16in and 3/8in |
| 8710-1217 | 8710-1217螺帽手 | Nut, driver 7mm |
| 8710-1561 | 8710-1561螺帽扳手 | Nut driver, 1/4in for FID jets |
| 8710-1709 | 8710-1709 管線切割器 | Cutter, tube |
| 8710-1807 | 8710-1807梅花起子 | TORX KEY T-20 |
| 8710-2140 | 8710-2140梅花起子 | Driver, T-10 Torx Key |
| 8710-2326 | 螺絲刀8710-2326 | 8 mm Hex Key |
| 9300-0311 | 檢漏液MS-SNOOP-8OZ | Leak detector 8oz |
| 959746-902 | 色譜柱959746-902 | Eclipse Plus C18,2.1 x 50mm, 5um |
| G1312-60020 | G1312-60020 主動入口閥閥芯 | Cartridge for active inlet valve 600bar |
| G1312-67305 | 毛細管G1312-67305 | SST connecting capillary,60cm, 0.17mm |
| G1312-87303 | G1312-87303不銹鋼毛細管 | SST Capillary 400x0.17 mm, m/m, ps/ps |
| G1313-87201 | 標準自動進樣器 | Needle, G1313A Autosampler |
| G1322-60001 | G1322-60001真空泵 | AC 3.3Vacuum Chamber, |
| G1329-87017 | 針座安捷倫G1329-87017 | Seat assy 0.17mm ID Standard Autosampler |
| G1329-87300 | 毛細管G1329-87300 | SST capillary 90cm, 0.17mm id, 1/16 fitt |
| G1531-20700 | FID收集極絕緣體 | FID Collector Insulator |
| G1531-80560 | Agilent G1531-80560噴嘴 | Jet, Capillary Optimized,0.29mm ID |
| G1544-80530 | 安捷倫捕集阱芯G1544-80530 | GC Split Vent Replacement Cartridge,2/pk |
| G4513-20561 | 安捷倫色譜柱G4513-20561 | Mounting post for 7693 and 7650 ALS |
| OT3-2 | 氧氣/水份捕集阱_通用性氣相/液相耗材 | Trap, O2/H2O, 1/8in |
產品咨詢
400-800-3875
li.qiu@spcctech.com
廣東省東莞市寮步鎮金興路419號703室（鑫龍盛科產業孵化園A3棟7樓）
關注我們
關于譜標
產品導航
版權信息
